|
LOGIC CONTROLLED TECHNOLOGIES |
|
|
DS1921G or DS1923 Sensor Kit:
Description: K-CLIP®: A reusable and uniquely formed stainless steel spring temper K-CLIP®. The K-CLIP® instantly attaches, with finger tip application, to any style line of fencing commonly used to contain livestock or wildlife. The constant force of the spring tension by the K-CLIP® provides excellent slip resistance on smooth wire up to 1/8" diameter and cordage diameters to 5/16". In the "clipped-on-self" mode, the K-CLIP® provides attachment to larger diameter objects such as tree limbs and piping. In the "clip-on-object" mode, the K-CLIP® provides attachment to objects such as sheet metal. iButton FOB: A uniquely formed plastic snap-in fob offering the simplest way to mount an iButton® for applications that require only momentary contact. The fob can be attached to objects using items such as the reusable K-CLIP®. Do not apply solvents or adhesives to this fob. This might affect the mechanical strength and reliability. This fob is now the DS9093AY+ yellow snap-in fob. DS1921G iButton Thermochron Sensor: A complete self contained temperature data logger measuring only 17.35mm wide and 5.89mm thick. It has an accuracy of +/- 1°C from -30°C to +70°C. A built in real-time clock and timer has accuracy of +/- 2 minutes per month. The logger automatically wakes up and measures temperature as user-programmable intervals from 1 to 255 minutes. Logs up to 2048 consecutive temperature measurements are recorded in protected nonvolatile random access memory. A long-term temperature histogram is also recorded with a 2.0°C resolution. There are programmable temperature-high and temperature-low alarm trip points available. The device records 24 time stamps and durations when temperature leaves the range specified by the trip points. 512 bytes of general purpose read/write nonvolatile randam access memory is available for user programming of various information such as placement location information. DS1923G Hygrochron Sensor: A complete self contained temperature/humidity logger that measures temperature and/or humidity and records the result in a protected memory section. The recording is done at a user-defined rate. A total of 8192 8-bit readings or 4096 16-bit readings taken at equidistant intervals ranging from 1s to 273hrs can be stored. In addition to this, there are 512 bytes of SRAM for storing application-specific information and 64 bytes for calibration data. A mission to collect data can be programmed to begin immediately, or after a userdefined delay or after a temperature alarm. Access to the memory and control functions can be passwordprotected. The DS1923 is configured and communicates with a host-computing device through the serial 1-Wire® protocol, which requires only a single data lead and a ground return. Every DS1923 is factory-lasered with a guaranteed unique 64-bit registration number that allows for absolute traceability. The durable stainless-steel package is highly resistant to environmental hazards such as dirt, moisture, and shock. Accessories permit the DS1923 to be mounted on almost any object, including containers, pallets and bags. POLY TAG: A HDPE Polyethalene UV stabilized plastic tag for indoor and outdoor use. It contains 2 reinforced extra thick hanging holes. It has a permanent molded 90° bend for providing movement in wind for excellent visibility. It can provide thermal draft blocking protection when used with the Thermochron sensor. Buy it now here: Click Here |
